Page:Move Previous 1 2 3 4 5 6 7 8 9 10  Move Next
18" Replacement Side Hinged Intake Door Hinge Kit, "W" Series

Piano style hinge for 18” high "W" Series trash chute or linen chute intake doors. Hinge should be ordered the same length as the side of the door where the hinge is located. Actual length of the hinge is 17-1/8" on one side and 17-1/2" on the...

SKU: 500968
$41.13
$39.07

18/4 CL2R Multi-wire Cable for Electrical Interlock Chute Intake Doors, 24 volt, "W" Series

Multi-wire cable for Series "W" 24-volt electrical interlock chute intake doors, per foot, excludes any conduit, if required. Suitable in applications of less than 75' runs. The National Electrical Code (NEC) and National Fire Protection Agency...

SKU: 501058
$2.85
$2.71

18/6 CL2R Multi-wire Cable for Electrical Interlock Chute Intake Doors, 24 volt, "W" Series

Multi-wire cable for Series "W" 24-volt electrical interlock chute intake doors, per foot, excludes any conduit, if required. Suitable in applications of less than 75' runs. The National Electrical Code (NEC) and National Fire Protection Agency...

SKU: 501216
$3.68
$3.50

18-1/2" Extended Gas Filled Chute Intake Door Closer, Ball Socket Ends

Gas filled trash chute or linen chute intake door closer comes complete with 10mm, composite ball socket ends. When measured from the mounting centers this extended closer is 18-1/2" long. Nitrate cylinder is .708 inches in diameter with a .314...

SKU: 500801
$33.65
$31.97

2 Position Key Switch for Electrical Interlock Panels

Key-operated switch for use as a replacement on electrical interlock and pneumatic control panels. This 22mm metal two-position selector switch features a coding adapter that enables the device to be set to either momentary or maintained...

SKU: 501107
$200.00
$190.00

21" Replacement Side Hinged Intake Door Hinge Kit, "W" Series

Piano style hinge for 21” high "W" Series trash chute or linen chute intake doors. Hinge should be ordered the same length as the side of the door where the hinge is located. Actual length of the hinge is 20-1/8" on one side and 20-1/2" on the...

SKU: 500969
$50.75
$48.21

22mm Selector Switch, Two Position Knob, Green With Black Bezel

This two position switch is for use on electrical interlock control panels which require a 22mm, green illuminated switch. 22 mm, Non-metallic, Selector Switch Operator, M22 Series, Black Bezel, Knob Type, Illuminated, Green, 2-Position, 45°...

SKU: 501275
$41.55
$39.47

24" High Bottom Hinged Intake Door Mechanism Box Cover

This is a cover for the connector bar mechanism found on "W" series bottom hinged 24" high intake doors, that connects the retracted 10" door closer to the door panel.

SKU: 501113
$75.00
$71.25

24" Replacement Side Hinged Intake Door Hinge Kit, "W" Series

Piano style hinge for 24” high "W" Series trash chute or linen chute intake doors. Hinge should be ordered the same length as the side of the door where the hinge is located. Actual length of the hinge is 23-1/8" on one side and 23-1/2" on the...

SKU: 500970
$54.60
$51.87

5" Retracted Chute Intake Door Closer

This 5” retracted hydraulic door closer is for use on rubbish or linen chute bottom-hinged intake doors. The 5” retracted dampener cylinder is 1” in diameter. The rod diameter is 5/16” with a #18 cross hole at the end of the shaft. Included...

SKU: 501120
$20.05
$19.05

6" Extended Shaft Chute Intake Door Closer

This 6” extended shaft hydraulic door closer is for use on rubbish or linen chute bottom-hinged intake doors. The 6” closer cylinder is 1” in diameter. The rod diameter is 5/16” with a #18 cross hole at the end of the shaft. The rod extends to 4...

SKU: 501122
$21.95
$20.85

6" Retracted Chute Intake Door Closer

This 6” retracted hydraulic door closer is for use on rubbish or linen chute bottom-hinged intake doors. The 6” retracted closer cylinder is 1” in diameter. The rod diameter is 5/16” with a #30 cross hole at the end of the shaft. Included...

SKU: 501121
$21.10
$20.05

8" #18 Retracted Chute Intake Door Closer

This 8” retracted hydraulic door closer is for use on rubbish or linen chute bottom-hinged intake doors. The 8” closer cylinder is 1” in diameter. The rod diameter is 5/16” with a #18 cross hole at the end of the shaft. Included hardware...

SKU: 501124
$22.73
$21.59

8" #30 Retracted Chute Intake Door Closer

This 8” retracted hydraulic door closer is for use on rubbish or linen chute bottom-hinged and side-hinged intake doors. The 8” closer cylinder is 1” in diameter. The rod diameter is 5/16” with a #30 cross hole at the end of the shaft. Included...

SKU: 501123
$22.73
$21.59

8" #56 Retracted Chute Intake Door Closer

This 8” retracted hydraulic door closer is for use on rubbish or linen chute bottom-hinged intake doors. The 8” closer cylinder is 1” in diameter. The rod diameter is 5/16” with a #56 cross hole at the end of the shaft. Included hardware...

SKU: 501125
$22.73
$21.59

8" Extended Shaft Chute Intake Door Closer

This 8” extended shaft hydraulic door closer is for use on rubbish or linen chute bottom-hinged intake doors. The 8” closer cylinder is 1” in diameter. The rod diameter is 5/16” with a #18 cross hole at the end of the shaft. The rod extends to 4...

SKU: 501126
$22.73
$21.59

8" Retracted Closer Kit for Side Hinged Doors

8" hydraulic closer kit for use on side hinged intake doors. This kit includes 8" hydraulic closer, butterfly bracket, pivot arm, two mounting shoes and all applicable hardware. This kit can be used on either a left or right side hinged intake...

SKU: 500714
$75.13
$71.37

Booster Spring for a 24”x24” Bottom Hinged Chute Intake Door, “W” Series

This booster spring is used in conjunction with a closer to assist an older style “W” series 24”x24” bottom hinged chute intake door in closing. This does not include the closer. See attached spec’s to verify product before ordering. Spring...

SKU: 500798
$25.00
$23.75

Chute Instructional Sign

5" high x 7" wide black matte sign with white letters can have any text desired. Sign fixes to wall, where needed, with adhesive. Text can be customized up to 50 characters. Indicate text to appear on sign in the box to the right. See attached...

SKU: 501051
$68.40
$64.98

Connector Bar for 15" High Bottom Hinged Intake Door

This connector bar is used with "W" series bottom hinged 15" high intake doors, and connects the retracted 10" door closer to the door panel. The connector bar itself measures 13.75" long.

SKU: 501109
$33.75
$32.06

Page:Move Previous 1 2 3 4 5 6 7 8 9 10  Move Next