The Right Prescription for Your Trash and Laundry ChutesTM
This roller switch is for use as a replacement on the “M" and "WM” Series, 120 volt electrical interlock chute intake doors. The switch is used to activate the latch allowing the door to open. See attached spec's to verify dimensions of this...
Electrical Interlock chute intake doors manufactured by Wilkinson and others utilize this type of roller switch to sense when door opens and closes. The micro switch is used to activate the latchs locking out the other doors when activated. This...
This solenoid is used as a replacement in the "M" and "WM" Series 120vac Electrical Interlock Chute Intake Door. It operates the chute intake door so it can be opened when the button is pressed. This is an open box style, continuous, pull style...
Used as a replacement for the 120vac Electrical Interlock Chute Intake Door solenoid. This solenoid operates the chute intake door so it can be opened when the button is pressed. This is an open box style, continuous, pull style solenoid. See...
Used as a replacement for the 24vac Electrical Interlock Chute Intake Door solenoid. This solenoid operates the chute intake door so it can be opened when the button is pressed. Measurements of the solenoid are 1.1" long x 1.2" wide x .9" high....
OEM Replacement of Wilkinson Chutes, Chute Source Canada, and Western Chutes, Compactors & Recycling electrical interlock 24vdc solenoids. Measurements of the solenoid are 1" in diameter and approximately 3" long. This has an intermittent cycle,...
Used as a replacement for the 24vac electrical interlock chute intake door solenoid. This solenoid operates the chute intake door so it can be opened when the button is pressed. This is a continuous, push style solenoid. Comes with mounting...
OEM replacement of Wilkinson Chutes, Wilkinson Hi-Rise, and Hi-Rise Recycling Electrical Interlock push type 120vac solenoid. This part is the solenoid only and excludes mounting plate, pivot, linking pin and plunger, which are no longer in...
This toggle switch is used for replacement in the electrical interlock power supply box manufactured by Valiant Products Inc. It is a 5 amp, 250 vac, single pull single throw (spst) switch with a metal, bat style actuator. RoHS compliant....
The terminal strip (block) is located in electrical interlock power supply boxes manufactured by Valiant Products Inc. It is used to route power from the power supply to the transformer , fuse, and ground. It is a four circuit, double row block....
This transformer is used in electrical interlock power supply boxes manufactured by Valiant Products Inc. to take the voltage coming from the wall down to 24 volts for the electrical interlock system. This transformer measures 4.90” high x 3”...
Latch trip arm fits most “W” series bottom hinged foot operated chute intake doors as well as some pneumatic doors. Beveled steel bar fits the pivot shaft and releases the latch before pressure is applied to the door panel. See product spec's for...
Stainless Steel Foot Pedal support and trim for "W" Series, Foot Operated Chute Intake Doors. Pedal has a three position pedal mount selection. Works with replacement foot pedal for same style chute intake doors. Fits most Wilkinson Chutes,...
This bronze and steel foot pedal is used on most “W” Series, Foot Operated, Rubbish Chute and Soiled Linen Chute Intake Doors. Cast bronze, it attaches to the stainless steel pedal trim with a round shaft pivot and bolts to the foot pedal...
This micro switch is used for replacement in the pneumatic chute intake doors manufactured by Midland Chutes. The micro switch allows the intake door to open or close by releasing the latch. It is a 15 amp, 250 vac switch. It is single pull...
This actuator and elbow is used with a micro switch in pneumatic chute intake doors manufactured by Midland Chutes. It works with the micro switch to allow the door to open or close by releasing the latch. It measures 11/16” in diameter and is...
Replacement UL listed automatic fire sprinkler head used in most manufacturer’s chutes. Sprinkler has 1/2” NPT female connection and activates when the surrounding temperature reaches 165 degrees. The sprinkler head is usually located just inside...
This chute fire sprinkler head guard is an “L” shaped, galvannealed sheet metal guard designed for attachment on the inside the chute to protect the sprinkler from damage during use. See attached spec's for this product before ordering.
Keyed On/Off electrical switch replaces 22.5mm switch or existing keyed on/off switch on all series trash compactor, recycling, cleaning and chute door electrical interlock control panels. Switch has a round metal operator (IP66, Type 4/13) with...