This is used on the inside of the chute intake door to create a seal around the opening that will keep smoke from escaping out the chute intake door into the trash room.

This is used on the inside of the chute intake door to create a seal around the opening that will keep smoke from escaping out the chute intake door into the trash room.

Latch assembly for “W” style foot operated chute intake doors. Includes two mounting screws and installs in the right side of a bottom hinged foot operated chute intake door. This style latch is used by almost all chute door manufacturers and...

This latch assembly is made up of the face plate and latch and has an adjustable 2-3/8" or a 2-3/4" set back from the back of the face plate to the spindle hole. The brass finish face plate is 1"x2-1/4" with a latch diameter of 7/8". The latch...

The latch barrel assembly is made up of the tube (case), latch and main spring and has a 1-21/32" set back from the inside face of the latch tube to the center of the spindle hole. It replaces a latch barrel assembly with a 1-5/8" set back. This...

The latch barrel assembly is made up of the tube (case), latch and main spring and has a 1-23/32" set back from the inside face of the latch tube to the center of the spindle hole. It replaces a latch barrel assembly with a 1-11/16" set back....

Complete replacement latch trigger assembly. Includes cast aluminum thumb trigger, machined spindle, "e" clip and trigger screw. This assembly has a custom spindle designed for doors where the latch must be held slightly lower in the door to...

Replacement "W" Series and some "R" Series, hand operated chute intake door latch thumb trigger. Includes spindle, screw & "E"-clip. This latch trigger and spindle does not include the latch barrel assembly available separately with a 1-5/8"...

Replacement, standard locking "T"-Style Handle assembly. Includes handle with spindle, two keys stamped CH751, and bolts for front mount installation of OEM handle on trash chute or linen chute intake doors. This handle works on all bottom,...

Replacement spindle for an ADA compliant chute intake door handle. This spindle is used on both side hinged and bottom hinged chute intake doors. To purchase a complete handle click here. Commonly used by Century and Midland Chutes, formerly...

Replacement, standard "T"-Style Handle with spindle, two keys, and bolts for front mount installation of OEM handle on trash chute or linen chute intake doors. When handle is in unlock position the key cannot be removed. The door can not be left...

Replacement, standard "T"-Style Handle with spindle, two keys stamped CH751, and bolts for front mount installation of OEM handle on trash chute or linen chute intake door. The spindle in this handle has a V-shaped grove with an extended piece on...

Standard front mount, through bolt style, ADA compliant, lever handle assembly complete with mounting screws, E-clip, lock and 2 keys stamped CH751. For bottom and side hinged chute intake doors. Handle to spin freely. Replacement spindles are...

Standard blind mount, ADA compliant, lever handle assembly complete with mounting screws, E-clip, lock and 2 keys stamped CH751. For bottom and side hinged chute intake doors. Handle to spin freely. Handle measures 4" from center of spindle/key...

Standard front mount, through bolt style, ADA compliant, lever handle assembly complete with spacer plate, mounting screws, E-clip, lock and 2 keys stamped AH112. For bottom hinged chute intake doors only, set up for handle orientation at 90...

Standard front mount, through bolt style, ADA compliant, lever handle assembly complete with spacer plate, mounting screws, E-clip, lock and 2 keys stamped AH112. Handle to spin freely. This handle is used on "W" Series chute intake doors,...

Chrome finish trash chute or linen chute intake door pull handle measuring 4-3/4" long with mounting holes on 4” center. Includes two 10-24 x 1-1/2" Philips pan head plated bolts for installation of OEM handle on intake door. This handle is used...

Cylinder, keyed lock for any size “W” Series trash chute or linen chute intake door. Lock is a 6 pin, 1-1/8” cylinder. The assembly includes two keys stamped 7185 LA1, escutcheon plate, ring, and spacers. Click here if extra keys are required....

Cylinder, keyed lock for any size “W” Series trash chute or linen chute intake door. Lock is a 6 pin, 1-1/8” cylinder. The assembly includes two keys stamped S54F, escutcheon plate, ring, and spacers. See attached spec’s to verify dimensions of...

Cylinder, keyed lock for any size “W” Series trash chute or linen chute intake door. Lock is a 6 pin, 1-1/8” cylinder. Includes two keys stamped 7185 SC1. See attached spec’s to verify dimensions of this product before ordering. Click here if...