Western Chutes standard duty steel debris chutes standard story heights are complete with anchor-down throat opening with dump stop kick plate and are adjustable for floor heights from 8' to 11'-8", making them usable on job after job. Additional...

This is a cover for the connector bar mechanism found on "W" series bottom hinged 24" high intake doors, that connects the retracted 10" door closer to the door panel.

Piano style hinge for 24” high "W" Series trash chute or linen chute intake doors. Hinge should be ordered the same length as the side of the door where the hinge is located. Actual length of the hinge is 23-1/8" on one side and 23-1/2" on the...

This complete Type A horizontal discharge door assembly includes a manual shut-off door that can be closed during a bin change or compactor maintenance. This allows the fire door attached to the fusible link to remain intact, preserved for when...

24"w x 24"h Left side hinged, hand-operated, self-closing, positive latching, 1-1/2 hour UL labeled chute intake style access door complete. Includes replaceable lock only "T" handle, latch, door closer, replaceable piano hinge with screws,...

24"w x 24"h Right side hinged, hand-operated, self-closing, positive latching, 1-1/2 hour UL labeled chute intake style access door complete. Includes replaceable lock only "T" handle, latch, door closer, replaceable piano hinge with screws,...

24”x24” Double (two bends) offset made of #12 gauge galvannealed steel. The double offset is 4’ long centerline to centerline with two support hanger clips on top and two at the bottom for connection to hanger supports available as an accessory....

24”x24” Double (two bends) offset made of #16 gauge galvannealed steel. The double offset is 4’ long centerline to centerline with two support hanger clips on top and two at the bottom for connection to hanger supports available as an accessory....

24”x24” double (two bends) offset made of #16 gauge galvannealed steel with a #13 gauge impact plate. The double offset is 4’ long centerline to centerline with two support hanger clips on top and two at the bottom for connection to hanger...

This complete Type A horizontal discharge door assembly includes a manual shut-off door that can be closed during a bin change or compactor maintenance. This allows the fire door attached to the fusible link to remain intact, preserved for when...

Two piece, #20ga galvannealed steel sheet metal flashing and draft stop, some times referred to as fire stop, installed at floor openings around the chute to separate the chute shaft from the collection room. Occasionally installed at every...

28”x28” Double (two bends) offset made of #12 gauge galvannealed steel. The double offset is 4’ long centerline to centerline with two support hanger clips on top and two at the bottom for connection to hanger supports available as an accessory....

28”x28” single (one bend) offset made of #12 gauge galvannealed steel. The single offset is 4’ long centerline to centerline with two support hanger clips on top and two at the bottom for connection to hanger supports available as an accessory....

28”x28” Double (two bends) offset made of #16 gauge galvannealed steel. The double offset is 4’ long centerline to centerline with two support hanger clips on top and two at the bottom for connection to hanger supports available as an accessory....

28”x28” single (one bend) offset made of #16 gauge galvannealed steel. The single offset is 4’ long centerline to centerline with two support hanger clips on top and two at the bottom for connection to hanger supports available as an accessory....

28”x28” double (two bends) offset made of #16 gauge galvannealed steel with a #13 gauge impact plate. The double offset is 4’ long centerline to centerline with two support hanger clips on top and two at the bottom for connection to hanger...

28”x28” single (one bend) offset made of #16 gauge galvannealed steel with a #13 gauge impact plate. The single offset is 4’ long centerline to centerline with two support hanger clips on top and two at the bottom for connection to hanger...

Western Chutes heavy duty steel debris chutes intermediate sections are add to the standard story height debris chute to extend the length of the chute for custom configurations. Additional 3' and 4' sections are available for custom...

Western Chutes heavy duty steel debris chutes intermediate sections are add to the standard story height debris chute to extend the length of the chute for custom configurations. Additional 2' and 4' sections are available for custom...

Western Chutes heavy duty steel debris chutes intermediate sections are add to the standard story height debris chute to extend the length of the chute for custom configurations. Additional 2' and 3' sections are available for custom...