Supplying up to 50 pneumatic chute intake doors. This ultra-quiet 70db system is designed to eliminate damage to the sensitive pneumatic chute door controllers and components in high humidity conditions with minimum maintenance intervals. System...

15"w x 18"h ADA Compliant Push Button Pneumatically Operated bottom hinged, Push Button and Lever Handle Operated , self-closing, positive latching, chute intake door assembly complete with stainless steel face and embossed trim. This door...

Supplying up to 20 pneumatic chute intake doors. This ultra-quiet system is designed to reduce, if not eliminate, damage to the sensitive door controllers and components. System includes: *4.6gal Ultra Quiet Compressor with pressure control,...

Replacement air chuck and fitting to connect the air pressure line to the compressor for ADA pneumatic chute intake door systems. The assembly is a direct replacement for valves used by Western Chutes, Compactors and Recycling Systems, Chute...

This filter system is designed for use with The Chute Doctors 4.6 & 10 gallon air supply systems to protect the sensitive logic controller / signal standardizers used in pneumatic chute doors, ensuring a clean dry air supply, preventing damage to...

This compressor reservoir tank auto-drain system is designed for use with the Chute Doctors 4.6 & 10 gallon air supply systems to protect the sensitive logic controller/signal standardizer used in pneumatic chute doors, ensuring a clean dry air...

5" high x 7" wide black matte sign with white letters can have any text desired. Sign fixes to wall, where needed, with adhesive. Text can be customized up to 50 characters. Indicate text to appear on sign in the box to the right. See attached...

Replacement circuitry valve used in 24 volt electrically interlocked pneumatic systems to activate chute intake doors. Made of aluminum, brass, and stainless steel with a Buna-N static seal for durable wear and tear. Features 1/8" port size,...

Replacement, circuitry valve used in 120 volt electrically interlocked pneumatic systems to activate chute intake doors. Made of aluminum, brass, and stainless steel with a Buna-N static seal for durable wear and tear. Features 1/8" port size,...

Replacement, circuitry valve used in key operated pneumatic systems to activate chute intake doors. Made of die cast zinc, a stainless steel, Teflon coated spool, Vitan O-ring, and Buna-N static seal for durable wear and tear. Has 1/8" NPTF...

Replacement, circuitry valve used in pneumatic systems to activate chute intake doors. Made of die cast zinc, a stainless steel, Teflon coated spool, Vitan O-ring, and Buna-N static seal for durable wear and tear. Instant tube fittings for nylon...

Replacement, dump valve used in 120 volt pneumatic chute system compressors at the air line supply. In the event of a fire or compressor maintenance this valve will dump the air in the lines. Features 1/4" port size, normally closed valve, and...

This replacement green palm button covers the light on "W" Series chute intake doors with an electrical interlock and pneumatic system. The button screws into place at the top of the chute intake door.

Replacement key for use with key-operated switch in "W" Series electrical interlock and pneumatic control panel. This key will not work with Cutler-Hammer 22mm switches.

Pneumatic Programmable Logic Controller, or Signal Standardizer, is used by several chute manufacturers for operation of ADA compliant pneumatic chute intake door systems. This allows the door to be completely pneumatic, without power, and...

Pneumatic, ADA compliant, chute intake door palm button control and valve assembly to fit standard 22mm hole as found on Wilkinson Hi-Rise and older door systems. This includes a red push button actuator that is 2-1/4" in diameter. This assembly...

This is a complete palm button activated pneumatic switch / valve used to activate chute intake doors. Includes tamper resistant, red anodized, threaded, 2-1/4 inch diameter button, 4mm tube connections and mounting hardware. See spec sheet for...

Replacement, red 2-1/4" palm button actuator as used on the palm button control valve assembly. The assembly is a direct replacement or upgrade modification for valves used by Wilkinson Hi-Rise and US Chutes requiring a 22mm hole mount.

2-1/4 inch diameter tamper resistant, red anodized aluminum, threaded palm button used with pneumatic controlled ADA compliant chute intake doors utilizing the 500931 palm button control valve assembly. The valve assembly is a direct replacement...

Pneumatic Actuator & Switch Assembly for Midland Electrically Interlocked Pneumatic Operated Chute Intake Door