24"x24" Bottom Hinged ADA Compliant Intake Door, "W" Series

LISTED LIFE-SAFETY FIRE DOOR
PROFESSIONAL INSTALL ONLY
This is a listed/rated chute fire door assembly. Buyer and Installer must verify door rating, size, and elevation above finished floor comply with the door listing, NFPA 82 sizing limits, NFPA 80, and all local code and AHJ requirements. Door must be installed by a licensed qualified professional and must remain self-closing and positive-latching at all times. Annual inspection/certification is required. Any door that fails to self-close or latch must be secured closed and removed from service until fully repaired and re-inspected. 

Please confirm installation type from pull down menu. Required for ordering.

24"w x 24"h Bottom hinged, hand-operated, self-closing, positive latching, chute intake door assembly complete. This door complies with ADA requirements of 5# effort to operate handle and 5# effort to pull open the door, making it fully ADA compliant. Door bears a UL Label with a clear listing of 1-1/2 hour, 30 minute - 250 degree max temperature rise. Includes replaceable ADA Compliant lever handle with key, enclosed door closer, removable 1/2" shaft hinge with bronze bearings, removable door panel and stainless steel trim. Door Panel made with 22 gauge type 304 stainless steel front and 18 gauge galvannealed steel back with 3/16" prime painted steel angle door frame. The door closer is mounted outside to the trash opening in a fully enclosed heavy duty box to ensure years of trouble free operation. Unlike others disposable doors, the Western Chutes, Compactors & Recycling Systems "W" Series model can be completely disassembled while mounted in the wall allowing every part to be cleaned, serviced or replaced with ease. Stainless Steel trim available blank or embossed with "Rubbish", "Soiled Linen", or "Recycle".

Other accessories available include electrical interlocks, key locks and more. A direct replacement for Wilkinson Chutes #802424, Wilkinson Hi-Rise, Wilkinson Chutes Canada, and Chute Source. Can be retrofitted to others chutes with sheet metal adaptors and wall modifications to fit chute door openings for doors of the same size. Complies with building codes, NFPA-82 and ASTM standards.

Made in the USA by Union Craftsmen.