The Chute Doctor
The Right Prescription for Your Trash and Laundry ChutesTM
>
Counterbalance Spring Hold-Open Assembly for 18” and 20” Wide Vertical Discharge Doors, “W” Series
SKU: CL-500217
Regular Price: $60.00
Patient Regular Price: $40.00 Normally Stocked
|
Counterbalance Spring Hold-Open Assembly for 18” and 20” Wide Vertical Discharge Doors, “W” Series
ONLY TWO LEFT AT THIS PRICE!
This counterbalance assembly is used on “W” Series, top hinged, vertical discharge doors measuring 18”w x 30”h and 20”w x 30”h. The counterbalance assembly holds the discharge door panel open when the chute is not being cleaned. This assembly consists of one 17” long spring with 20” long sheath, two S-hooks, and one fusible link. The fusible link will melt when the ambient temperature reaches 165 degrees causing the door panel to slam shut. This is an integral part of the fire safety and labeling of the door. See attached spec's of this product before ordering. The discharge door should remain open at all times, except when washing down the chute is necessary. Closing the door will force the water into the hopper’s built-in drain. DO NOT use the chute with the discharge door closed as the door will be damaged. |
   |
 |
  |
Chute Doctor Keeping Your Chute Healthy™
California License #767939; Arizona License #ROC149925
© 2002 - 2023 The Chute Doctor. All rights reserved. All trademarks referred to herein are property of their respective owners.
Counterbalance Spring Hold-Open Assembly for 18” and 20” Wide Vertical Discharge Doors, “W” Series
ONLY TWO LEFT AT THIS PRICE!
This counterbalance assembly is used on “W” Series, top hinged, vertical discharge doors measuring 18”w x 30”h and 20”w x 30”h. The counterbalance assembly holds the discharge door panel open when the chute is not being cleaned. This assembly consists of one 17” long spring with 20” long sheath, two S-hooks, and one fusible link. The fusible link will melt when the ambient temperature reaches 165 degrees causing the door panel to slam shut. This is an integral part of the fire safety and labeling of the door. See attached spec's of this product before ordering.
The discharge door should remain open at all times, except when washing down the chute is necessary. Closing the door will force the water into the hopper’s built-in drain. DO NOT use the chute with the discharge door closed as the door will be damaged.
This counterbalance assembly is used on “W” Series, top hinged, vertical discharge doors measuring 18”w x 30”h and 20”w x 30”h. The counterbalance assembly holds the discharge door panel open when the chute is not being cleaned. This assembly consists of one 17” long spring with 20” long sheath, two S-hooks, and one fusible link. The fusible link will melt when the ambient temperature reaches 165 degrees causing the door panel to slam shut. This is an integral part of the fire safety and labeling of the door. See attached spec's of this product before ordering.
The discharge door should remain open at all times, except when washing down the chute is necessary. Closing the door will force the water into the hopper’s built-in drain. DO NOT use the chute with the discharge door closed as the door will be damaged.
SKU: CL-500217
