24"x36" Fire Rated Wall Access Door, Prime Painted

24"w x 36"h Left side hinged, hand-operated, positive latching, 1-1/2 hour UL labeled access door. Includes two exterior, recessed rings attached to a sliding bolt, two interior latch releases, heavy duty spring closer, and concealed hinge. Door panel and frame are made of 16 gauge galvannealed steel with prime coat finish suitable for painting. Door is for wall installation only and can be mounted with left or right side hinged operation. To facilitate all types of wall installation, frame is available with bolt holes and masonry anchors. Optional cylinder lock is available. Complies with building codes and ANSI-UL 10B standards.

Door is not approved for use as a chute intake or discharge door. This door is for use in accessing equipment, valves, switches, etc. located inside a fire rated shaft, such as those enclosing a chute.

WARNING: CAUTION REQUIRED WHEN USING 24" x 24" OR LARGER ACCESS DOORS

Purchasing and installing a 24" x 24" or larger chute access door requires careful consideration due to the larger size. This dimension can present a safety hazard, as it is large enough for a human to fit into, increasing the risk of injury or entrapment.

Key Safety Considerations:

1. Restricted Access: Only authorized personnel should have access to areas where these chute doors are installed.
2. Keep Locked: Do not leave open for public access.
3. Proper Supervision: Ensure oversight when the doors are in use to prevent accidents.
4. Signage: Install visible warning signs near the access door to alert users to the potential danger.
5. Alternative Sizes: Make every accommodation to use a smaller access door size to mitigate this risk.

Disclaimer:
It is the responsibility of the purchaser and installer to ensure that all safety measures are in place, and the chute is used in compliance with local safety codes and regulations. Failure to address these concerns may cause serious injury or harm.

Proceed with caution.