Ratchet type binder with eye bolt ends only. 22" take-up with 24" barrel length and 15.5" handle length. Has 1" Screw diameter and 9,200 lb working load limit. Features Uni-Steel, high carbon handle. Cold-drawn tubing heavy swedged barrel. Alloy...

This is a replacement pressure switch for RAM Series trash compactors. Features: 900 psi rating High Pressure Snap Action 3 amps Buna-N Diaphragm Zinc Plated Steel housing 7/16x20 SAE male swivel fitting SPDT circuit DIN 43650A Terminal with...

Adjustable Duplex Pressure Switch for rubbish compactors manufactured by Wilkinson and others. The left hand switch is adjustable from 500-1000 PSI and the right hand switch from 1000-2000 PSI and is used to sense forward and reverse positions of...

5" high x 7" wide black matte sign with white letters can have any text desired. Sign fixes to wall, where needed, with adhesive. Text can be customized up to 50 characters. Indicate text to appear on sign in the box to the right. See attached...

Replacement Coil DSG-01-N-A1 for Hystar D03 Directional Control Valve as used on Wilkinson, Metro & Western trash compactors. This coil is used for a 110vac systems and is not rectified. The coil is the electro-magnet which actuates the valve to...

This compactor electronic pressure sensor and transmitter controls the compactor by sending pressure readings to the PLC Control Panel. It features an analog output, and measures approximately 2.25 inches in length and 0.9 inches in diameter....

Complete replacement high pressure hydraulic hose assembly for any RAM series compactor. Includes 6 feet of 1/2" diameter, 3000 psi high pressure hydraulic oil line, and male and female fittings. The hose is covered in black oil, abrasion and...

Additional linear feet of replacement high pressure hydraulic hose for any RAM series compactor. This 1/2" diameter, 3000 psi high pressure hydraulic oil line is covered in black oil, abrasion and weather resistant, modified nitrile synthetic...

This M12 pre-wired 90 degree connector joins the electronic pressure sensor to the compactor. The 4-pin female end has a screw-on metal collar, and includes a 6.6 foot cable. This connector is for use with sensors found on some compactor models...

This M12 pre-wired straight connector joins the electronic pressure sensor to the compactor. The 4-pin female end has a screw-on metal collar, and includes a 6.6 foot cable. This connector is for use with sensors found on some compactor models...

Complete Directional Control Valve with rectified coils to be used as a replacement on RAM series trash compactors and in all types of automated hydraulic equipment. This is a direct replacement for part number RPE3-063C11 / 12060E5. The...

This assembly has a 22.5mm diameter and uses a 40mm, non-illuminated, two position, mushroom head button. The button is red. It includes one normally closed contact. It is used in control panels on various compactors, other control panels and...

This assembly has a 30.5mm diameter and uses a Type 4/13 non-illuminated, two position, mushroom head button. The button is red. It includes one normally closed contact. It is used in control panels on various compactors, other control panels and...

This glass fuse is used in the control panels for some compactors. It provides short circuit protection with a voltage rating of 250 volts. It measures 5mm x 20mm. It is RoHS Compliant and meets UL/CSA/ANCE 248 Standard. See attached spec's to...

Replacement photoelectric sensor (photo eye) for RAM series trash compactors is used to determine when the compactor has trash in the hopper for automatic cycling in chute-fed operations. See attached specs for this product before ordering.

Pre-Programmed Zilio 3 Programmable Logic Controller (PLC) for chute door electrical interlock controls, trash or garbage compactors, recycling systems, chute cleaning systems and more. This relay is used in equipment manufactured by Western...

Ratchet type binder for compactors with eye bolt ends only. The handle measures 15". The measurement from center of eye hole to center of eye hole is 12.75". Ratchet includes nut and bolt for attaching ratchet to compactor.

This light is for use as a replacement on the “W” Series, compactors and 120 volt electrical interlock control panels. Light measures 22mm and is equipped with an incandescent light behind a red frosted diffuser. The monoblock design allows for...

Replacement OEM access panel door handle for chute-fed compactors. This stainless steel handle has four 11/64" mounting holes. It measures 5.5" x 4.25". Uses key CH501. Extra keys are available.

Set of two CH501 keys for use on compactor, paddle-style access door handles.