Replacement photo eye reflector for "W" series trash compactors. The reflector sits opposite the photo eye in the trash compactor to be “seen” by the photo-sensor to determine when trash is in the collection bin. This reflector is required for...

This wheel is in a fixed position and fits on all Western Trash Compactor “W” Series Trash Compactor Receiver Bins. The wheel is 6” in diameter with a total height of 7-1/2”. It is 2” wide made of Polyurethane. It has a load rating of up to 900...

This wheel swivels and fits on all Western Compactor “W” Series Compactor Bins. The wheel is 6” in diameter with a total height of 7-1/2”. It is 2” wide made of Poly II Urethane. It has a load rating of up to 900 lbs and has a 1/4” steel top...

Pressure switch for use on trash compactor hydraulic power packs. Switch provides for full or fault indication of compactor. If compactor has only full light you would have only one pressure switch. If you have an 80% and a 100% you would...

Breather cap air intake used in the trash compactor oil reservoir tank using a chrome metal 10 micron breather filter cap. This cap is for use with any series trash compactor or recycling system oil reservoir with a 1” threaded breather fitting....

Filter air intake into the trash compactor oil reservoir tank using this black ABS breather filter cap. This cap is for use with any series trash compactor or recycling system oil reservoir with a 3/4” threaded breather fitting. See attached...

High efficiency hydraulic oil in 5-gallon pails for use in any series trash compactor power pack. Used in small, one-half yard, chute fed compactors up to 10 yard behemoths as well as the hydraulics on trash trucks. Also used in chute fed...

Heavy duty long lasting hydraulic fluid suction filter for use with all Western Chutes, Compactors & Recycling Systems chute fed trash compactor and recycling systems power packs. Most compactor manufacturers recommend the filter be replaced...

Heavy duty long lasting hydraulic fluid suction filter for use with all Western Chutes, Compactors & Recycling Systems chute fed trash compactor and recycling systems power packs. Most compactor manufacturers require the filter be replaced...

This Triac style, single pull single throw (spst), normally open, magnetic switch is used in all “W” Series compactor access doors. When the access door is opened and the magnetic connection is broken the compactor will stop running. The magnet...

Stainless steel oil filled pressure gauge for use in any series trash compactor or recycling system power pack that operates within this pressure range. This pressure gauge measures 0-3000 PSI and has a 1/4” NPT bottom stem fitting for attachment...

Keyed On/Off electrical switch replaces 22.5mm switch or existing keyed on/off switch on all series trash compactor, recycling, cleaning and chute door electrical interlock control panels. Switch has a round metal operator (IP66, Type 4/13) with...

Receiver lid hold down bar to use as a replacement on any size Western Compactor, “W” Series receiver bin. This bar holds the lid down to allow for compaction. Without the lid securely locked in place the trash simply pushes up and out of the...