Miscellaneous Parts

1/2" Chemical Injector Mix Valve for Chute Janitor Premier Cleaning System.

Replacement full cone pattern spray nozzle for Chute Janitor™ or Premier Chute Cleaning Systems. Includes: 1 brass spray nozzle, 120 degree full cone spray pattern, 1/4" thread diameter

Replacement flat fan pattern spray nozzle for Chute Janitor™ or Premier Chute Cleaning Systems. Includes: 1 brass spray nozzle, 145 degree flat fan spray pattern, 1/4" thread diameter

Supplying up to 50 pneumatic chute intake doors. This ultra-quiet 70db system is designed to eliminate damage to the sensitive pneumatic chute door controllers and components in high humidity conditions with minimum maintenance intervals. System...

Cylinder, keyed lock for any size “W” Series trash chute or linen chute intake door. Lock is a 6 pin, 1-1/8” cylinder. Includes two keys stamped 7185 SC1. See attached spec’s to verify dimensions of this product before ordering. Click here if...

1/2” diameter, through-the-door, shaft hinge for 12” wide "W" Series trash chute or linen chute intake doors. Hinge should be ordered the same length as the side of the door where the hinge is located. Actual length of the hinge is 14”. This...

Replacement full cone pattern spray nozzle assembly for Chute Janitor™ or Premier Chute Cleaning Systems. Includes: 1 brass spray nozzle, 120 degree flat fan spray pattern, 1/4" thread diameter 1 nozzle mounting assembly This kit not only...

This is a replacement pressure switch for RAM Series trash compactors. Features: 1,200 psi rating High Pressure Snap Action 3 amps Buna-N Diaphragm Zinc Plated Steel housing 7/16x20 SAE male swivel fitting SPDT circuit DIN 43650A Terminal with...

Replacement spray nozzle only for Western Chutes Chute Janitor™ cleaning system. This nozzle is located at intake doors and has a 145 degree spray angle to spray into the trash chute only, not against the trash chute intake doors. This is a high...

Replacement flat fan pattern spray nozzle assembly for Chute Janitor™ or Premier Chute Cleaning Systems. Includes: 1 brass spray nozzle, 145 degree flat fan spray pattern, 1/4" thread diameter 1 nozzle mounting assembly This kit not only replaces...

Replacement spray nozzle assembly for Western Chutes Chute Janitor cleaning system. This nozzle is located at intake doors and has a 145 degree spray angle to spray into the trash chute only, not against the trash chute intake doors. This is a...

1/2” diameter, through-the-door, shaft hinge for 15” wide "W" Series trash chute or linen chute intake doors. Hinge should be ordered the same length as the side of the door where the hinge is located. Actual length of the hinge is 14”. This...

This is a cover for the connector bar mechanism found on "W" series bottom hinged 18" high intake doors, that connects the retracted 10" door closer to the door panel.

1/2” diameter, through-the-door, shaft hinge for 18” wide "W" Series trash chute or linen chute intake doors. Hinge should be ordered the same length as the side of the door where the hinge is located. Actual length of the hinge is 14”. This...

This current limiting fuse is used in compactor and other control panels. Rating is 2 amp, Time Delay, 600 VAC. Fuse measures 1.5” long by 0.41” wide. See attached specs to verify dimensions of this product before ordering.

1/2” diameter, through-the-door, shaft hinge for 21” wide "W" Series trash chute or linen chute intake doors. Hinge should be ordered the same length as the side of the door where the hinge is located. Actual length of the hinge is 14”. This...

This two position switch is for use on electrical interlock control panels which require a 22mm, green illuminated switch. 22 mm, Non-metallic, Selector Switch Operator, M22 Series, Black Bezel, Knob Type, Illuminated, Green, 2-Position, 45°...

This is a cover for the connector bar mechanism found on "W" series bottom hinged 24" high intake doors, that connects the retracted 10" door closer to the door panel.

1/2” diameter, through-the-door, shaft hinge for 24” wide "W" Series trash chute or linen chute intake doors. Hinge should be ordered the same length as the side of the door where the hinge is located. Actual length of the hinge is 14”. This...

Two piece, #20ga galvannealed steel sheet metal flashing and draft stop, some times referred to as fire stop, installed at floor openings around the chute to separate the chute shaft from the collection room. Occasionally installed at every...