Miscellaneous Parts

This counterbalance assembly is used on “W” Series, top hinged, vertical discharge doors measuring 28”w x 36”h and larger. For door sizes 36" and above order two of these assemblies. The counterbalance assembly holds the discharge door panel open...

This counterbalance assembly is used on “W” Series, top hinged, vertical discharge doors measuring 24”w x 30”h and smaller. The counterbalance assembly holds the discharge door panel open when the chute is not being cleaned. This assembly...

Complete Directional Control Valve with rectified coils to be used as a replacement on RAM series trash compactors and in all types of automated hydraulic equipment. This is a direct replacement for part number RPE3-063C11 / 12060E5. The...

Replacement wheels for use on any horizontal, rolling discharge door in the “M” Series. This comes as a set of four wheels. Proper working wheels are important to protect the building in the event of a fire. The discharge door panel rolls on the...

Replacement wheels for use on any horizontal, rolling discharge door in the “W” Series. This comes as a set of four wheels with mounting hardware. Proper working wheels are important to protect the building in the event of a fire. The discharge...

ETL - multi-purpose, dual response fusible link / release device. In addition to the standard fusible link portion designed to melt at 165 degrees F, the link can also be actuated by an electrical impulse triggered by an instantaneous response to...

Round Head Pivot Pin with Tinnerman style speed nut used for attaching retracted hydraulic door closer to butterfly and other mounts through a shaft with a #30 (.1285") hole in the shaft. A direct replacement for Wilkinson, Wilkinson Chutes,...

This Double Timer operates the System3 Odor Control Power Unit, which allows up to two spray unit attachments. The timer allows the user to set the interval time between sprays from 1 to 10 minutes and the duration of spray from 1 to 20 seconds....

2" x 1.5" x 48" long, #20 gauge galvannealed angle piece to be attached to shaft walls when draft stop is being installed between floors or has no floor support structure inside the chute shaft. This can be cut in the field to any length needed.

Replacement, dump valve used in 120 volt pneumatic chute system compressors at the air line supply. In the event of a fire or compressor maintenance this valve will dump the air in the lines. Features 1/4" port size, normally closed valve, and...

24 volt Electrical Interlock Power Supply for "W" Series chute intake doors, enabling them to be outfitted with Lock-Up style controls. The standard "W" series electrical interlock intake doors require that the user press and hold down a button...

This assembly has a 22.5mm diameter and uses a 40mm, non-illuminated, two position, mushroom head button. The button is red. It includes one normally closed contact. It is used in control panels on various compactors, other control panels and...

This assembly has a 30.5mm diameter and uses a Type 4/13 non-illuminated, two position, mushroom head button. The button is red. It includes one normally closed contact. It is used in control panels on various compactors, other control panels and...

This light weight, battery powered fan dispenser is easy to install in any area needing a little extra boost of odor control. It is perfect for trash rooms above the discharge level to control odors on the floors tenants occupy. A whisper quiet...

This wheel is in a fixed position and fits on all Western Trash Compactor “W” Series Trash Compactor Receiver Bins. The wheel is 6” in diameter with a total height of 7-1/2”. It is 2” wide made of Polyurethane. It has a load rating of up to 900...

Latch trip arm fits most “W” series bottom hinged foot operated chute intake doors as well as some pneumatic doors. Beveled steel bar fits the pivot shaft and releases the latch before pressure is applied to the door panel. See product spec's for...

This fuse is used in the control panels for some compactors. It provides short circuit protection with a voltage rating of 250 volts. It measures 2” long by 1/2” wide and 9/16" in diameter. See attached spec's to verify dimensions of this product...

This fuse is used in the control panels for some compactors. It provides short circuit protection with a voltage rating of 250 volts. It measures 2” long by 1/2” wide and 9/16" in diameter. See attached spec's to verify dimensions of this product...

Fusible link for horizontal, accordion style discharge door to keep the door open. This fusible link is designed to melt when the ambient temperature in the collection room reaches 165 degrees. The fusible link is UL Listed and manufactured from...

Fusible link with plated sheet metal screw for mounting to the counterbalance hold open of a top hinged vertical discharge door panel or the bottom of a horizontal, rolling style discharge door panel. This fusible link is designed to melt when...