Miscellaneous Parts

Hopper discharge door night (slam) latch kit for the sides of vertical, hopper discharge door and frame assemblies. This kit includes the night latch, night latch keeper, mounting plate and hardware. This latch bolts onto the door panel and...

Disinfecting & Sanitizing Unit nylon injector valve for use with most Disinfecting & Sanitizing units. Mix ratio is pre-set unlike the brass injector valve, which is adjustable. The injector valve includes pick-up hose. See attached spec's for...

Pneumatic, ADA compliant, chute intake door palm button control and valve assembly to fit standard 22mm hole as found on Wilkinson Hi-Rise and older door systems. This includes a red push button actuator that is 2-1/4" in diameter. This assembly...

This is a complete palm button activated pneumatic switch / valve used to activate chute intake doors. Includes tamper resistant, red anodized, threaded, 2-1/4 inch diameter button, 4mm tube connections and mounting hardware. See spec sheet for...

2-1/4 inch diameter tamper resistant, red anodized aluminum, threaded palm button used with pneumatic controlled ADA compliant chute intake doors utilizing the 500931 palm button control valve assembly. The valve assembly is a direct replacement...

Replacement photo eye reflector for "W" series trash compactors. The reflector sits opposite the photo eye in the trash compactor to be “seen” by the photo-sensor to determine when trash is in the collection bin. This reflector is required for...

Replacement photoelectric sensor (photo eye) for RAM series trash compactors is used to determine when the compactor has trash in the hopper for automatic cycling in chute-fed operations. See attached specs for this product before ordering.

Replacement Pick Up Check Valve for our Odor Control Spray Units. A check valve is installed at the bottom, or foot, of the pick-up tube in our spray units. This combination check valve and screen prevents the solution from draining back down...

Pneumatic Actuator & Switch Assembly for Midland Electrically Interlocked Pneumatic Operated Chute Intake Door

Pneumatic plunger to release the door latch on a push button automatic pneumatic operated chute intake door. Used on doors manufactured by Western Chutes, Architectural Refuse Solutions (ARS), Chute Source LLC, Wilkinson Chutes Canada and many...

This poly tubing is used for our Odor Control Spray Systems to distribute high pressure air to the spray units in the system. It comes in 100’ rolls and has a 1/4” outside diameter (OD). This natural, translucent LDPE tubing is non-toxic,...

Pre-Programmed Zilio 3 Programmable Logic Controller (PLC) for chute door electrical interlock controls, trash or garbage compactors, recycling systems, chute cleaning systems and more. This relay is used in equipment manufactured by Western...

Stainless steel oil filled pressure gauge for use in any series trash compactor or recycling system power pack that operates within this pressure range. This pressure gauge measures 0-3000 PSI and has a 1/4” NPT bottom stem fitting for attachment...

Western Chutes Chute Janitor™ Cleaning Control Panel red light assembly. This assembly has a 30.5mm diameter, uses a Type 4/13 incandescent light, has a red lens, and is 120VAC. UL Certification Listed E131568 and CSA Certification 68551. See...

Western Chutes Chute Janitor™ Cleaning Control Panel red light assembly. This assembly has a 30.5mm diameter, uses a Type 4/13 incandescent light, has a red lens, and is 24VAC. UL Certification Listed E131568 and CSA Certification 68551. See...

This red, dome light is for use as a replacement on the chute intake door panel for a 24 volt electrical interlock system. Light will snap-fit into a panel 0.8mm to 6mm thick and an 10.1mm hole. This light comes complete and ready for...

Replacement solenoid valve for Chute Janitor™ chute cleaning systems. This solenoid valve is used in the Western Chutes, Compactors & Recycling Systems automatic Chute Janitor™ multi-head 120vac chute cleaning system. Valve is for 3/8" pipe and...

Replacement Jug holding 22 liters for use in our Odor Control Spray Units. Includes cap with hole for pick-up tube to be installed. Replacement pick-up tube offered separately. See attached spec's for this product before ordering.

This red, dome light is for use as a replacement on the chute intake door panel for a 24 volt electrical interlock system. Light will snap-fit into a panel 0.8mm to 6mm thick and an 8.1mm hole. This light comes complete and ready for...

This micro switch is used for replacement in the pneumatic chute intake doors manufactured by Midland Chutes. The micro switch allows the intake door to open or close by releasing the latch. It is a 15 amp, 250 vac switch. It is single pull...